There are numerous reasons why a homeowner may require plumbing repair when it comes to pipeline repairs. One of the most common causes of plumbing repairs is a collapsed pipe. Collapsed pipes are the most common cause of sewer backups in the United States. These problems can be caused by outdated plumbing infrastructure that has not been fixed or replaced. But what exactly is a collapsed pipe? What does it look like? What causes it, and what can be done to prevent it?

Read on to learn more about the cause of how pipes collapse.

Deterioration Due to Time

An aging material causes pipe collapses. Every pipe has a limited amount of strength. Their durability begins to deteriorate over time. Weather exposure and external element damage are significant causes of deterioration. This is why the maintenance crew needs to check them and replace them from time to time.

Limescale Accumulation

Hard water is caused by dissolved minerals like calcium and is rampant in various places of the United States. Furthermore, hard water, being mineral-rich, is prone to limescale formation. Limescale is a yellowish buildup on surfaces exposed to hard water. These accumulations can cause pipe degradation and blockage.

Intrusion of Plant Roots

Pipes can collapse as a result of root intrusion. Plant roots have a high tendency to crawl to areas with water. Having a piping system near trees increases the risk of your pipes collapsing because roots can wrap around the pipes, damaging and choking your lines.

Clogs due to Fatbergs

Fat, oil, and grease (abbreviated as FOG) and can combine with kitchen sink wastes to form Fatbergs. They are mostly found on pipelines after the kitchen sinks. These blockages might eventually develop to be so large and hefty that they shatter pipelines. They can, at the absolute least, trap wastewater in pipes, placing extra strain on them. The more of these build-ups there are, the more weight the pipes must bear.

Immediate Remedial Actions

Pipe collapses occur in both water supply and drain systems. You can significantly reduce water pressure if a water supply line fails. Taps and fixtures connected to the affected line may not run. Collapsed sewer lines can cause multiple slow drains. The water from your toilets may also take a long time to drain.

When faced with a pipe collapse, take the actions outlined below.

Water Supply Line Burst

In this situation, cut off the main water valve. This will prevent water from flooding your property.

After closing the valve, call a plumber. Depending on the extent of the damage, the plumber may merely need to patch it up.

Sewer Pipeline Collapse

Call a sewer line repair specialist if you fear a central drain or sewer pipe collapse. You may simply have slow drains now, but you risk sewer backups unless that line is repaired. The longer you put off pipe repairs, the more likely it is that they may break.

Conclusion

After doing all the remedial actions and calling a professional plumber, you’ll want to discuss the advantages and disadvantages of each option with your plumber. Additionally, a professional plumber should consider your needs and budget. The trick is to locate a plumber capable of providing high-quality service at an affordable price. This ensures the longevity of your plumbing system. Throughout the year, numerous specialists offer discounts, coupons, and bargains. Several even lend money to those in need.

Are you currently experiencing plumbing issues? Are you concerned that you may have a busted pipe on your property? 

Make sure to contact the best plumber in Lake County, CA. Contact Benjamin Franklin Plumbing California for assistance. We are your reliable plumbing service company in Lakeport, CA, and the surrounding areas of California. We have an outstanding record in this area for successfully fixing a wide variety of plumbing issues. 

Nobody wants a leaking water heater. But it doesn’t automatically mean you need to replace it. Sometimes, when the leak comes from the top, you can still easily fix it without spending too much. But before you can address the problem, you have to identify the cause. So, here are some common reasons your water heater is leaking from the top.

1. Loose Pipe Fittings and Leaking Valves

When your water heater is leaking from the top, one of the places you should check is the area around the hot water and cold water valves. These pipes allow cold water to enter the water heater and hot water to exit it. You can find them at the top of the heater. Cold water may be leaking from the inlet valve found on the cold water pipe. If so, it may have loosened and all you need to do is tighten it with a wrench.

Aside from a loose pipe fitting, the pipe itself may be broken from corrosion. Rust marks and powdery white substance surrounding the pipe are indicative of corrosion and would mean it’s time to replace them. Since it’s difficult to replace a corroded pipe, it’s best to contact a plumber to do the job.

2. Pressure Relief Valve Issues

Every water heater has a safety feature called a pressure relief valve which is often found on the top or on the side of the heater. The pressure relief valve plays a vital role in the water heater as it prevents the tank from bursting. It does so by releasing steam or hot air when the heater has built up pressure and steam inside. 

While the pressure relief valve does release steam, it should not be leaking water. If water is leaking out of the valve, you can open and close it a few times to see if the leaking will stop. Sometimes, you would even need to wait a day or two to find out if the leaking has stopped. 

If the leaking continues even after that time, you likely need to replace the pressure relief valve. You can do it yourself or contact a plumber to help you out.

However, if the leak is coming from the piping attached to the valve instead of the valve itself, this may indicate that the tank is overheated. Another problem would be if the water is incredibly hot. If so, you’ll need to call a plumber to diagnose the problem and find the appropriate solution.

3. Corroded Anode Rod

Your water heater typically has an anode rod which helps prevent the tank from corroding. The anode rod is made from aluminum, manganese, and zinc, which allows it to draw away corrosion from the sides of the tank. But eventually, the rod will deteriorate as time goes on. And when the anode rod is completely corroded, it would no longer be able to do its job. This means corrosion will start to happen on the tank’s inner lining.

One sign to look out for is bubbling water where the rod enters the tank. If this is the case, a corroded anode rod may be what’s causing the leak. You will then have to contact a plumber to inspect your water heater tank for corrosion.

Conclusion

While your water heater isn’t supposed to leak water, there’s no need to panic. If the leaking is coming from the top, the problem may be solved easily without having to spend too much to fix it. However, the leak could also mean the need to replace certain parts. If this is the case, make sure to contact your local plumber for further help.

Fix your water heater problems with the help of Benjamin Franklin Plumbing. We are a licensed, bonded, and insured plumber in Clearlake, CA that offers quick and reliable service. We understand how important it is for your water heater to work as it should, which is why we specialize in water heater repair, water heater installation, and water heater replacement. Call us today!

In general, the plumbing system in your home plays a vital role in the supply and distribution of water. However, this isn’t the only function it has. The entire system does not just consist of pipes but also drains and gutters as well. This only means that it also contributes to clearing out water in your property.

Of course, just like any system at home, your plumbing also needs maintenance care. Luckily, it doesn’t take that much to keep your drains, pipes, and gutters in good shape. At most, the only thing people need to worry about is clogging. And yet, this is an issue that has been common in many households all over the country.

With that said, clogging happens when there’s an accumulation of dirt or debris in drains and pipes. But, there are also instances when foreign objects get stuck inside, hindering them from functioning correctly. And to make matters worse, most clogging issues stem from people’s neglect to practice proper drain maintenance, as they usually just flush or throw items that might obstruct their pipes.

So to help you prevent such problems from arising in the first place, here is a list of a few household items that you must never throw or flush down your drain ever.

1. Wipes

Indeed, there are flushable wipes sold in the market. However, just because it’s marketed as something safe to flush does not necessarily mean that it actually is. Unbeknownst to many, wipes do not break down in pipes like paper towels. They tend to clump together and clog drains, so it’s best not to throw this item in your draining system, even if it’s flushable.

2. Cotton

Pretty much like wipes, cotton usually clings to pipes and clumps together. But if you think it’s bad enough to throw in cotton in your drain, cotton swabs are even worse. The plastic rods in cotton swabs often get stuck in tight turns and corners, which causes more things that get flushed down your drain to accumulate and clog your plumbing system.

3. Oil

It’s common knowledge that oil and grease are things that must never be thrown in your drain. However, only a few people actually understand why these liquids are kept away from plumbing systems. Hence, some ignore the warnings, thinking that tiny amounts will do no harm. Sadly, even a few drops of oil and grease can accumulate over time, presenting a bigger problem in the future.

4. Paint

You might not be aware, but some cities and states have policies regarding proper paint disposal. In fact, it is considered the worst thing to pour down your drain. It doesn’t just pose a clogging problem but also increases the risk of contaminating the water supply.

Conclusion

As a homeowner, it’s your responsibility to properly lead your household to care for all systems within your property. It’s fortunate enough that your plumbing system does not require extensive maintenance. Thus, you don’t really have to go to great lengths to ensure it stays in good condition. At the most basic level, you’ll just have to steer clear of throwing the items listed above in your drain—and you’ll find that it’s not at all that hard to care for your drains and pipes.

Are you having drain clogging issues? Benjamin Franklin Plumbing is a service provider specializing in the repair and maintenance of pipes, drains, and water heaters in Lakeport, CA. So if you’re ever in need of licensed, bonded, and insured plumbers in Lakeport, we are here to help 24/7. Give us a call today!

Hard water in your household can lead to costly repairs down the road. When groundwater travels through your home’s pipes, the dissolved minerals react with the heat, resulting in scale and buildup that damages your pipes, appliances, and fixtures.

When rain falls, the water is clean and devoid of minerals, otherwise referred to as soft water. It accumulates minerals like calcium and magnesium as it travels through the earth. 

Hard water is water that has accumulated a high quantity of minerals. While hard water poses no adverse health risks, it poses significant hazards for your plumbing system and house in general.

What are the Benefits of Going Soft?

Soft water is excellent for cleaning since it does not leave behind soap scum or mineral stains.

Because it is a more efficient and effective cleaning agent, you may be able to save money on your water bill by not having to re-wash clothing or dishes or by taking longer showers to feel well cleaned and rinsed. The following are the top four advantages of using soft water in your house.

1. Better Plumbing Overall

Hard water has a high mineral content, especially calcium and magnesium. This leads to a significant deposit buildup over time, which is hazardous to your plumbing system. 

Pipe clogs reduce water pressure throughout your house, but they will usually go undiscovered until you discover a leak or burst pipe. The harm has already been done. On the other hand, soft water has a considerably lower mineral concentration and may save you a lot of trouble and money in the long run.

2. Save More Money

Soft water not only saves your pipes but also saves your cleaning supplies. Soft water homes use far less soap than hard water households, whether shampoo, bleach scrub, or laundry detergent. 

Less accumulation means less time spent cleaning, as well as a reduction in the number of harsh chemicals, flushed down the drain.

3. Get Softer Skin and Hair

In the shower, hard water is renowned for drying out our skin and hair. While a single shower or bath may not make a significant impact, the consistent use of hard water showers will pile up over time, drying out your skin and making it age faster. Your skin will often become dry and itchy, and your hair lifeless and brittle.

Fortunately, the answer is straightforward. Soft water may counteract these effects, bringing new life to your hair and skin. Try a few showers in soft water, and you’ll notice a difference right away as your hair and skin get softer and more moisturized.

4. Better for the Environment

Everyone nowadays is doing their part to curb the climate crisis and keep our world a little greener. When you use a water softener, you may help to reduce the number of greenhouse gases emitted by your household. 

How so? The answer is straightforward. Soft water warms more effectively than hard water, reducing energy use and lowering greenhouse gas emissions. As an added plus, you will have decreased energy costs, making it an actual win-win situation.

Final Thoughts

If you want to soften your water, do some research and consult with a plumber about how the system will affect your home’s plumbing. It’s also a good idea to learn about the maintenance needs of a water-softening system before purchasing one.

If you’re looking for professional plumbers in Hidden Valley, CA, to solve your hard water problems, look no further than Benjamin Franklin Plumbing! Our licensed personnel offer various plumbing services, ranging from water treatment to plumbing repairs. Contact us today to learn more!

Discovering a water leak in your house is never a pleasant experience. The problem can last as long as a week or even months if you don’t deal with it early. That is why it’s crucial to check for early signs of a water leak before they become a bigger issue. 

The sooner you find a water leak, the earlier you can have it fixed by a plumber in Ukiah, CA. Moreover, you can also check for water leak signs yourself before you contact professional plumbing services. 

In this article, you’ll learn three warning signs of a water leak in your house. 

Where Do You Usually Find a Water Leak? 

Often, the first spots to check are your cabinets under the kitchen, laundry room, and bathroom sinks. An easy way to tell if there’s a leak in these areas is seeing water puddles—typically in the bases of tubs, toilets, or dishwashers. 

If you’re also interested in getting a water heater, you’ll need to determine first if your house is safe from any leaks. 

3 Signs to Check for a Water Leak in Your Home 

It’s only a matter of time before the water leak can result in significant water damage to your home, so it’s best to fix the issue as soon as possible. If you catch a water leak promptly, you can avoid the leak worsening in the long run. Before you take a look around your home, make sure to remember the following signs indicating that there is a water leak present in your household:

Sign #1: Hearing Running Water

The first sign is to listen to any sound of running water around your home, especially if nobody’s using any plumbing appliance. Hearing water moving through the pipes is usually an indication of a water leak occurring. 

Sign #2: Weak Water Pressure

Is there a sudden change in your faucets’ water pressure? Another sure sign that your pipe has a water leak is reducing the water pressure from your faucets. 

If you notice that they’re coming from over one appliance, it could indicate that there could be a serious water leakage problem. That major sign can also be your best mark to seek help from plumbers. 

Sign #3: Overactive Water Meter 

An overactive water meter is one of the things you should not miss that can signify a water leak. Don’t forget to spend some time checking on your water meter at least once a day so you can keep track of its condition. 

When no one uses any faucet or flushes a toilet, your water meter should not be running. Does it sound like someone has left a sink running, but after checking, there’s none? If so, there could be a water leak in your house! 

Conclusion 

After checking on the above pointers, and they all apply to you, it’s time to request plumbing services to fix those water leaks! Taking care of the problem can prevent you from experiencing further water damage that can incur even heftier expenses. Once you’ve noticed the water leaks, make sure to ask your plumber to check other pipes to eliminate all possibilities of any water leak. 

If you’re looking for licensed plumbers in Ukiah, Benjamin Franklin Plumbing has got you covered. We offer a quick and reliable 24/7 emergency service for our clients in need. Give us a call at (707)-263-1629 today! 

Like most homeowners, you may not have heard of this before, but hard water may be running through your pipes. While that may sound strange, there is indeed a variant of water known by that term. You may be wondering what makes it different from the regular tap water that comes out of your faucet. Well, the main denominator would be the mineral present within the liquid itself.

Hard water has a high amount of minerals in it, much so that it may taste way different than what you are used to. It may even cause some adverse effects on your pipe, clogging or damaging it in the process. With that said, you may probably want to do something about it to save your pipelines from any form of damage.

While most people understandably do not have the appropriate knowledge to determine whether or not their pipes are being run with hard water, they may still be able to look out for the different signs that may help them figure it out at first glance. 

If you happen to be one of those people and would like to know more about this, no worries. We created this quick and easy guide detailing the signs to watch out for: 

1. You Have a Flaky, White Showerhead

A flaky showerhead is a sure sign of having heavy water in your pipes. While that may not always be the most significant sign to look out for, it still has a certain validity, especially if you consider the leading indicators of minerals. Usually, they come in a crystallized form, and they often dry up when exposed to air.

Such can be the cause of those random flakes which may have stuck on your showerhead. If that’s the case, immediately clean it off or call your most trusted plumbers to deal with the problem for you.

2. You Have a Clogged Faucet or Spray Nozzles

Due to the abundant amount of calcium in heavy water, your spray nozzles and the outer ends of your faucet also tend to get clogged. This is somewhat similar to the pointer above. However, the main difference is that instead of the usual flakes, your faucet will accumulate the minerals, getting them stuck at the small passages where your water supply will supposedly exit from the main pipeline.

This is tougher to handle since the clog is more complex to reach than your average mineral flakes. Of course, only a plumber will be able to take such a concern.

3. Strange Residues on Your Plates

Out of all the most common indicators, this one may probably cause the most panic amongst homeowners. Water contamination is never a good thing, which is why no one will ever have any second thoughts about dealing with hard water once they see the residues. 

They usually come in mineral flake bits or a soft white substance, much like a strangely colored moss. Either way, anyone will be disgusted to even drink out of a tap that has this kind of water.

Conclusion

Hard water isn’t something that people often blame for their pipeline’s damages. However, it can affect them in many ways that we can’t even imagine. The presence of a white, flaky component, the random clogging of the spray nozzles, and the appalling residues are just some of the sure signs that say we are plagued with this water variant.

In such a case, there is no other way to deal with this than with the help of well-trusted plumbers who know how to approach this type of problem from the very start. Feel free to call for help and never attempt to do any DIY repairs yourself so that you can have the problem fixed without damaging your pipes any further.

If you are looking for skilled plumbers in Hidden Valley, CA, to handle your heavy water problems, look no further than Benjamin Franklin Plumbing. Our licensed personnel offer various plumbing services, ranging from water treatment to plumbing repairs. Contact us today to learn more!

Faucets are easy to ignore since they’re not usually part of a household’s daily cleaning routine. You never really notice the importance of this household equipment until you need it and can’t use it. However, they are an integral part of your home’s daily functioning. 

For that reason, you should learn to spot early signs of wear and tear and other faucet problems to address them immediately. That way, you’ll save yourself trouble in the future.

Here are four of the most common faucet problems in a household and how to fix them:

1. Rust and Wear and Tear

Once you notice the tiny hint of rust developing on your faucet’s exterior, there’s a good chance it’s formed on the inside, too. Rust affects the quality of your tap water and is also a health concern if you drink from it. 

Like limescale, rust is a common faucet problem that is part of its general wear and tear. Faucets inevitably develop rust over years of use unless your faucet is rustproof. But once you do have a rust problem, it’s better to have it replaced with a new and better model.

2. Leaking Water

When your faucet drips or leaks water, it takes a toll on your water bill and makes you annoyed with the constant dripping sound. But what’s worse is that water that pools in the sink may overflow and damage furniture and electronic equipment if left unattended.

This problem is typically caused by a dislodged or torn washer. As these silicon-based seals become stiff and corrode over time, they get damaged and create tiny water trickles. You should have them replaced immediately before the water pressure completely destroys them, creating a bigger problem.

3. Low Water Pressure

This is an issue that’s common with older faucets with aerators at the opening. These tiny holes can get blocked with dirt and debris, inhibiting water flow. In addition, leaking pipes and some plumbing blockages can also cause low water pressure. However, if the pipes are working fine, the problem may lie with the constrictor valve inside the faucet. 

4. Excessive Noise

When your faucet creates excessive noise like whistling, screaming, or chattering, it indicates a problem that requires consulting a plumbing expert to find and address the root cause of the problem. One of the most common reasons for this issue is a loose washer. 

However, if you’ve already tightened the washer or have replaced it with the correct size and yet the problem still persists, it could be caused by another issue. You’ll need a professional plumber to take a look.

Conclusion

There are many possible causes behind a faulty or malfunctioning household faucet. The important thing is that you have it addressed immediately and consult with a professional plumbing service. 

Tackling your faucet concerns need to be addressed as soon as possible so they don’t worsen and cause bigger problems. It also saves you from getting health problems, such as in the case of rust on the inside of your tap. It’s best to consult professional plumbing services for these issues. 

Benjamin Franklin Plumbing offers quick and reliable plumbing services. We are licensed, bonded, and insured plumbers providing emergency plumbing repairs and installations. So, if you’re looking for a reliable plumber in Middletown, CA, call us now at 707-987-0130!

Of all the rooms in the home, the bathroom has to be one of the most used rooms. For that reason, it isn’t surprising to know that most of the problems a house experiences happen right in the bathroom. More specifically, the toilet is one of the most used fixtures. Once in a while, the toilet doesn’t perform as you expect, becoming a considerable setback for the entire family.

That being said, some toilet problems can be fixed by yourself. For example, if you find that some tissues are clogging the bottom, you might easily fix it by pulling it out. However, when do you know that a toilet requires a professional’s touch to be fixed? Here are the signs to look out for:

1. Water Is Pooling at the Base

If you see any amount of water pooling at the base of the toilet, there’s a chance it might be a problem, and there’s a chance someone just splashed water there. Dry the area up thoroughly and come back a couple of hours. If you see that the area has gotten wet again, that’s a sign that the seal at the toilet’s base has worn down. If the area isn’t wet, then check the connection between the tank and the hose supply. You can put paper towers here to see if it gets damp or not. If it does, then the leak is from that area.

Regardless of where the leak is, you may need to call a plumber to come and fix the problem. An issue like replacing the supply hose might be easy, but it is best left to the professionals if you have to replace the seal.

2. The Tank Is Taking Too Long to Fill

It is normal for tanks to take a while to refill after each flush. However, if you notice that the tanks take a lot longer to fill than they used to, it could be because either the water pressure is weak or that there is a leak somewhere causing the water in the tank to seep out. While you can try and fix issues like weak water pressure by turning up the water supply, other issues like leaks can be challenging to address.

Whatever the problem might be, calling a plumber is a good idea. They can quickly identify the root cause of the issue and have the problem fixed right away.

3. There Is Water Running in the Toilet

At first glance, this doesn’t sound like a problem. In fact, water is supposed to run in the toilet, right? Well, if you find water to be constantly running even when it’s not in use, chances are there’s a leaky flush valve in there. You can try and fix this first by checking that the toilet tank ball falls right onto the seal. Another cause of this problem is that the chain length isn’t right to seal the hole at the bottom of the tank. If this is the case, you can usually fix it by adjusting the chain length to seal it properly. 

If none of the above tips worked, call a plumber to come to address the problem.

Conclusion

If you are experiencing any of the problems above, the best course of action you should be taking is to call professional plumbers to address the problem for you. With their help, the root cause of the issue can quickly be identified and solved. This ensures that not only is the problem gone, but that the toilet has been restored to its best state to ensure worry-free use for the next few months to come! That said, if you want to, feel free to ask the plumber to walk you through the problem. You might learn a thing or two about fixing toilets, giving you a chance to try and tackle the problem by yourself next time!

Benjamin Franklin Plumbing are licensed, bonded, and insured plumbers offering 24/7 emergency services to tackle any plumbing issues. If you are looking for plumbers in Ukiah to solve your toilet-related problems, contact us right away! 

Do you live in an area where it rains heavily? If so, chances are that you’ve experienced watching the water levels rising and hoping it doesn’t begin to seep into your home. Every year, as the weather grows more unpredictable, you may consider taking additional precautions to protect your home from a flood.

A sump pump could be just what you need. Homes and commercial buildings in flood-prone areas often swear by this piece of equipment and the fact that they help property owners avoid being ankle-deep in water and neck-deep in water damage repair fees. In this article, we’ll be discussing this piece of equipment and why you should consider having one installed.

What is a Sump Pump?

A sump pump is a submersible device put in a sump pit dug in your home’s lowest location, such as the basement or crawl space. This tiny but crucial addition to your home helps to minimize flooding in your basement.

The pump is most of the time on standby, waiting to be activated. The soil around your house becomes oversaturated when it starts to rain excessively. Groundwater overflows into the sump pit, which begins to fill with water. The float switch on the sump pump is activated, and the pump is turned on.

The sump pump keeps groundwater from rising to the level of your basement floor and causing a flood by taking it from the pit and emptying it into a nearby storm drain, dry well, or detention pond. You can think of a sump pump as an extra layer of flood insurance in this sense!

Why Do You Need a Sump Pump?

A sump pump is a low-cost investment with significant benefits. Here are some of the advantages of installing a sump pump in your home:

It Helps Keep the Crawlspace or Basement Dry

Many people have a sump pump installed for this reason. When the pump pit fills up with water, the pump removes it via a line that runs to the outside. The slope built around the house allows water to flow away from the structure.

Between the pump and the pipe is a check valve that prevents the water from flowing back into the home. A float activator—similar to the one found in a toilet tank—or a pressure sensor are used to detect excessive water levels in sump pumps. The majority of sump pumps are powered by electricity and do not require any additional wiring.

It Helps Prevent Mold and Mildew

Mold and mildew are prevented by using a sump pump to keep the region beneath the house dry. These spores are not only ugly, but they may also be harmful to people’s health and induce allergic reactions.

It Notifies You When the Water Level Has Risen Too Far

Even if a sump pump isn’t working, it can warn a homeowner if their basement or crawlspace is about to flood. If the homeowner is away, some modern sump pumps can even call the homeowner’s cell phone. The homeowner can then contact an emergency plumber to avoid a basement disaster.

It Increases the Home’s Value

A functioning sump pump makes the home more appealing to potential buyers and may increase the property’s total value. A basement that is kept dry has a better chance of remaining structurally sound than one that floods almost every time it rains.

A plumber in Middletown will assist you with the necessary repairs to get your sump pump running correctly again if you are ready to move and your sump pump is not in excellent working order.

Key Takeaways

Sump pumps have a nice ring to them and are a term that will undoubtedly linger in your mind for longer than you might expect. It’s also a good thing they’re so memorable because they can be crucial to a perfectly functioning home in many ways. While it might be an expensive investment, it will pay dividends in home security and comfort.

Do you need a new sump pump for your home, or do you have a problem with your current one? It is worth hiring a plumber in Middletown, CA. Let Benjamin Franklin Plumbing handle your sump pump and all your plumbing requirements. Request a quote right now!

A faucet is where you can get water in your home. Since water comes out of it, it typically covers many things we do at home in a day, such as washing the dishes and washing our face. If your faucet is too tight and can’t rotate, it can interfere with your daily routine.

So, how exactly do you loosen tight faucets? We’re here to tell you what you need to know. Read on below to learn more.

The First Few Signs of a Tight Faucet

The primary method of maintaining your faucet’s loose movement is lubrication. Many homeowners take this for granted until they experience a time when it won’t move.

If you notice that your faucet is tightening, or if you’ve been struggling with it for quite some time, it should be dealt with immediately, or else it will cause you more problems in the long run. You can always get a plumber to fix your faucet, but the good news is that you can do it yourself.

The primary fix for most tight faucets is a simple cleaning or replacement of a component. This component is typically the cartridge. Depending on your faucet’s brand, the method of how you’ll open it up differs because some faucets will require a cartridge pulling tool.

Disassembling Stuck Faucet Handle 

To determine the problem with a stuck faucet, you’ll have to disassemble it first. You can evaluate the situation by looking inside the faucet.

First, you have to shut off your faucet’s water supply. The shut-off valve is typically found beneath your sink or on the wall. Once you see the shut-off valve, rotate it clockwise to shut it off. If there’s no dedicated valve, turn off your main water supply altogether.

Once that’s done, you can check for a screw somewhere on your faucet. You can find this screw in any of the following places:

  • At the bottom of the faucet area that’s facing you
  • At the side of the faucet
  • Covered by a cap at the center

Once you see the screw, unscrew it and remove the handle. You will then see a nut that keeps the valve in place. Remove the bolt, and you can now proceed with the next step.

Detaching and Cleaning the Cartridge

Using a pair of pliers, grip the cartridge and pull it up. If it doesn’t move, check your faucet’s brand name because it will only move with a cartridge pulling tool from the same brand.

If you successfully remove the cartridge, check if there’s any corrosion—corrosion is the primary cause of tightening and stuck faucets.

If corrosion is present, scrub the affected area with a stainless steel wire brush until it smoothens. Afterward, get a clean rag and apply vinegar to it. Wipe this rag on the affected area so that the rust will come off easier. You can also scrub other parts of the faucet to prevent the problem from happening again.

If the cartridge isn’t severely damaged, you can still reuse it. Otherwise, get a replacement. To get a matching cartridge, you can bring it with you to the hardware store for an exact match.

Once everything is done, it’s time to reattach everything. Insert the cartridge and the nut, then tighten it. Reattach the faucet’s handle and tighten the screw that holds it in place. Afterward, turn on your water supply and check if the faucet is operational again.

Conclusion

A tight or stuck faucet is a huge annoyance, which is why it should be fixed as soon as possible. The information detailed above can help if you’re having trouble with your faucet, so be sure to follow them!

You might be able to fix your faucet, but there are times when work can be too much, especially if you have a busy schedule. The best solution for your problem is to call a plumber. If you’re looking for plumbers in Lakeport, Benjamin Franklin Plumbing has got your back! We offer fast and reliable service, so you can be sure that your problems will go away if we’re on the job. Contact us today to learn more!